Canon Pixma Ts302 Setup

First, unbox your printer completely. After unpacking the printer, link the Canon TS302 printer to the power source and switch it on. Perform the basic setup, install the printer driver on your computer, and try a test print. Quick steps for setting up the Canon Pixma TS printer are provided below

Pixma Ts302 Unboxing Setup

To know how to unbox the Canon TS302 printer, follow the instructions given below.

  • Place the Canon Pixma TS302 printer package on a table.
  • Try to remove the top cover of the package using a sharp material.
  • Open the top cover of the package and slowly take all the components out one-by-one from the box.
  • You can see the two handles of the printer cover. Take the printer out of the package using the handles.
  • Clear all the protective tapes surrounding the edges of the Canon TS302 printer.
  • Check and make sure that you have cleared all the packing materials from the printer.
  • Now, uncoil the power cable supplied to you. Connect the cable between the printer's power port and the other end to the wall outlet.
  • After that, press the Power button on the printer control panel and wait for the printer to become idle and silent.
  • Set the basic printer preferences and click the OK button to complete the initial setup process.
  • After completing the basic printer setup, load the paper tray using a stack of paper.
  • After filling the main tray, unpack the ink cartridges provided with your printer package.
  • Remove the orange protective tapes surrounding the ink nozzle.
  • Slowly, insert the unpacked ink cartridge into the printer.
  • Now the Canon TS302 printer is ready. Now, connect the Canon TS302 printer and the computer through a wired or wireless network.
  • Install the printer driver of your Canon TS302 printer on your computer by following the on-screen procedures.
  • After finishing the installation process, try to print a test page or scan a document.

Pixma Ts302 Driver & Manual Download

To download the Canon TS302 printer Manual from the official site, follow the instructions given below.

  • Sign into the official site of the Canon TS302 printer from your web browser.
  • Click the Support button on the Home screen of the Canon printer.
  • Select the Drivers & Download option from the Support menu.
  • Scroll down the screen and select the Printers option followed by TS Series.
  • Select the TS302 printer series. Now the manual download page of the Canon Pixma TS302 printer will open.
  • Scroll down the screen and click the Manual tab next to the Drivers & Downloads option.
  • Locate and select the user manual file you wish to download and click the View button.
  • Now the selected user manual file will open in the PDF viewer.
  • Click the Download icon on the PDF viewer screen.
  • Create or select a folder to save the file and click the OK button.
  • Once the driver download is complete, you can view your user manual when offline.
  • To download the Canon Pixma TS302 printer driver, click the Download button below the screen.
  • As soon as you click Download, you will be directed to the driver page.
  • Specify your operating system and its version in the pop-up menu.
  • Click the Download button. Now the selected driver download process begins.
  • After the driver download process completes, start the installation process and complete it by following the instructions displayed on the screen.

Pixma Ts302 How To Print

Follow the instructions to perform basic printing function.

  • Turn on your Canon Pixma TS302 printer.
  • Load enough plain paper required for printing a document.
  • Download the latest version of the printer driver software from the manufacturer’s site.
  • Install and run the downloaded printer driver.
  • Open the printer driver setup screen to change the following settings required for printing.
  • Go to Quick Setup and choose the predefined print settings like standard, photo printing, business document, and paper saving as per your need from the Commonly Used settings section. Once you select the predefined print settings, click Save.
  • The remaining sections like Additional Features, Media Type, and Printer Paper Size will be automatically adjusted to the predefined values.
  • Choose an appropriate Print Quality. You can choose from High, Standard, and Draft quality settings. The quality options vary depending on the print setting you select from the Commonly Used Settings.
  • Click OK to save the changes.
  • Once you click the OK option, your printer starts to print a document automatically.
  • You can change the Quick Setup settings whenever you want to change the print settings.

Pixma Ts302 How To Copy

Canon Pixma TS302 features Smartphone Copy, which helps you to copy a document from your smartphone using the Canon Print app. Proceed with the following instructions to perform the copying function using a smartphone/tablet.

  • Download and install the Canon Print Inkjet/SELPHY application on your smartphone or tablet from the Google Play store.
  • Turn on your Canon printer.
  • Open the paper tray and load enough paper to perform the copying function.
  • Place the original document on Smartphone Copy Grid on your printer.
  • Open the Canon Print Inkjet/SELPHY application on your device.
  • Press the Smartphone copy option from the menu.
  • Take a shot of the original document using the application.
  • Make sure to cover the whole sheet of the original document on your smartphone. Hold your smartphone horizontally to cover the entire sheet of the original document.
  • Once you take a shot of original, the Perspective Correction screen will display. The app sets the Perspective Correction frame automatically.
  • Adjust the outer shape of the image to fit the screen correctly by dragging the frame.
  • You can change the aspect ratio setting to A4 or Letter. The default aspect ratio setting is Auto.
  • Once you are done with the setting changes, click Next.
  • The Image Correction screen displays.
  • Click the Rotate icon at the bottom-left corner of the screen to rotate the image by 90 degrees. This will not affect the print result, the image on the screen only rotates.
  • You see the Brightness icon next to the Rotate icon. Click the Brightness icon to adjust the image brightness automatically.
  • Press the Done option at the bottom-right corner of the screen to proceed with the next step.
  • Click Next when the Document Print screen displays.
  • Specify the number of copies you need, paper size, paper type on the Print Settings screen.
  • Click the Print option to print the image from your smartphone/tablet.

Pixma Ts302 How To Scan

Follow the instructions below to perform scanning operation using the Canon Print Inkjet/SELPHY application.

  • Download the Canon Print Inkjet/SELPHY application from the Google Play Store or App store.
  • Open the downloaded application and press the Smartphone Copy on the main screen of the app.
  • Position the original image on the Smartphone grid and snap an image.
  • Perform the auto-detection process. Adjust the brightness and orientation of the image and press the Done option.
  • To export the saved document as PDF, press the Export icon at the bottom left corner of the screen and click Next.
pixma-ts302-how-to-scan

Pixma TS302 Wireless Setup

Proceed with the following procedure to set up a printer on Windows.

  • Press the ON/Stop button on your printer if the lamp A glows.
  • Hold the Direct button on the printer LED control panel. Do not release the button until the Direct lamp flashes.
  • Ensure that the Wireless lamp flashes.
  • Proceed with the setup in the application screen as per the instructions below.
  • Use any browser extension to download the Setup file from the manufacturer’s site.
  • Open the Setup file and choose the Start Setup option.
  • Select your place of residence from the given list. If your place of residence does not appear in the given list, choose Others.
  • After choosing the appropriate region, press the Next button at the bottom of the screen.
  • Read the End-User License Agreement and click Yes to agree with the terms of the agreement.
  • Now, the Extended Survey Program will appear on the screen.
  • Read the information about your Canon product and Press the Agree option to agree with the survey program. Make sure to agree with the survey program. If not, you cannot run the driver setup.
  • Click the box icon next to the Deactivate the Block option in the Firewall settings and press Next.
  • Check the connection method and also check the name of the printer and model. Click Yes, if you connect your printer to the router properly using a wireless connection.
  • Select your router and enter the Network key or Password and press the Next option at the bottom of the screen.
  • Wait till the network connection completes.
  • Once you get the Connection Completed message on the screen, click Next.
  • The Setup Complete window appears when the setup for printing is complete and press the Next option.
  • Choose the software which you want to install and click Next.
  • Press the Next option at the bottom of the screen when a new window displays on the screen.
  • Select the Next option when you want to collect the regional information. If not, click Skip.
  • Click the Exit button on the screen once you complete the Installation.

Pixma TS302 Wireless Direct

Follow the instructions below to enable Wireless Direct of the printer.

  • Turn on your Canon printer.
  • The Direct light will glow when you press the Direct button. This indicates that the Wireless Direct is enabled.
  • Proceed with the following procedure to perform printing operation with Wireless Direct.
  • Go to Settings on your smartphone and select the Enable Wifi option to a enable wireless connection.
  • Choose the name of your printer and model from the given list and enter the Network key or Password.
  • Connect the device and the printer.
  • Install the Canon Print Inkjet/SELPHY application from the Google Play store on your smartphone and perform the printing operation.
pixma-ts302-wireless-direct

Pixma Ts302 Network Connection Settings 

The Network Connection Settings is a feature that helps you to change the connection mode during the installation process. To change the connection mode, follow the instructions given below.

  • Switch on your Canon TS302 printer.
  • Hold & press the Direct button available on the printer control panel.
  • Perform the above step until the light next to Direct starts to blink.
  • Now, check and make sure that the Wireless light is blinking.
  • If so, it means the Wireless connection is enabled successfully.
  • Now, go back to the system’s installation screen, continue with the setup instructions, and complete it.
pixma-ts302-network-connection-settings

Pixma Ts302 Ij Network Device Setup Utility

  • The IJ Network Device Setup Utility is a diagnosis tool that does a regular check-up over the printer & network settings and restores its status. To perform the network settings feature using the IJ Network Device Setup Utility option, follow the instructions given below.
  • First, you need to launch the IJ Network Device Setup Utility feature on your computer.
  • Click the Start menu, and select All Programs followed by Canon Utilities.
  • Select the IJ Network Device Setup Utility option on the Canon Utilities screen.
  • Now a message dialog box appears on the screen, click the Yes button to agree with the statements displayed on the screen.
  • Select the Printer Network Setup option. Now the available HP printers are displayed on the screen.
  • Scroll down the screen and select your Canon TS302 printer from the list.
  • Select the Network Settings option in the Printer Settings section.
  • Enter the appropriate credentials when prompted and click the OK button.
  • Now the Network Settings screen opens.
  • Change the settings you wish to make by selecting the option from the pop-up menu under the IPV4, IPv6 tab.
  • After completing the changing process, click the Set button.

Pixma Ts302 Mobile Printing

To perform the Mobile printing operation on your Canon Pixma TS302 printer, follow the instructions given below.

  • Before you begin the Mobile printing operation on your Canon printer, check and make sure that you have done the initial printer setup.
  • To perform the Mobile printing operation, you need to download the Canon PRINT Inkjet/SELPHY app from the Google Play Store app and install it on your Android device.
  • After the app installs, launch it on your Android device and register your Canon TS302 printer.
  • Touch the plus or Printer icon on the home screen of the Canon PRINT Inkjet/SELPHY app.
  • Touch Register with Cloud followed by Yes.
  • Perform the on-screen instructions displayed on the Android device to complete the registration process.
  • Once the registration process completes, your Canon TS302 printer is ready for the Mobile printing.
  • Touch the Cloud option on the home screen of the Canon PRINT Inkjet/SELPHY app.
  • Tap the Start button, select a document you wish to print and press the OK button.
  • Now your Canon TS302 printer starts to print the selected document.

Pixma Ts302 Apple AirPrint

To perform the Apple AirPrint operation on your Canon TS302 printer, follow the instructions given below.

  • Check and make sure that the Canon TS302 printer is turned On and the main tray contains enough paper to perform the print operation.
  • Now, select and open the document you wish to print on your iPhone.
  • Tap the Operation icon followed by Print.
  • Select your Canon TS302 printer from the list and set the print settings in the Printer Options section.
  • Touch the Print button.
pixma-ts302-apple-airPrint

Pixma Ts302 Google Cloud Print

To perform the Google Cloud Print operation on your Canon Pixma TS302 printer, perform the procedures given below.

  • Before you begin the Cloud Print process, ensure that you have your a Google account.
  • After that, you have to register your Canon TS302 printer with the Google Cloud Print feature.
  • Open the Chrome browser and sign into your Google account.
  • Click the Settings option followed by Show Advanced Settings.
  • Select Manage and click the Add Printer button.
  • Select your Canon Pixma TS302 printer from the list and click the OK button when prompted for confirmation.
  • You can see the wireless light on the printer control panel blinking thrice.
  • Now, press the Network button. Now your Canon TS302 Printer registration process is done successfully.
  • Sign into your Google account during the print operation.
  • Now, click the Menu button on your Chrome browser.
  • Select the Print option from the menu list.
  • Select the document to be printed and follow the on-screen instructions.
  • Click the Print button. Now your Canon TS302 printer starts to print the selected document.

PIXMA TS302 PIXMA Cloud Link

The Canon Pixma TS302 printer is a compact wireless printer with the cloud link capability. This feature allows you to connect the Pixma printer to cloud services. It also helps you print pictures and documents from the photo-sharing websites. The Pixma Cloud Link enables the transfer of documents scanned from the printer to a data storage device, and the best part about this is, a computer is not required for the transfer.

PIXMA TS302 Troubleshooting

To troubleshoot issues on the Pixma TS302 printer, you can refer to the topics mentioned below. The common issues faced by the Pixma TS 302 users include connectivity issues, ink-related issues, error codes being displayed on the LCD, and so on.

PIXMA TS302 Printer Offline

You can follow the troubleshooting guidelines mentioned below to fix the ‘Pixma TS 302 printer offline’ issue.

  • Right-click on the Canon Pixma TS 302 printer icon, which is found on the notification tray of your computer.
  • From the options displayed, choose the Printer Menu.
  • Choose the ‘Cancel All Items’ option to stop any print jobs that are stuck.
  • Check the Pixma TS302’s network connections for any issues, rectify them, and then restart the Pixma device.
  • Then, go to the Devices & Printers option and right-click your printer’s icon. Ensure that the feature entitled, ‘Use Printer Offline’ is unticked.
  • If this doesn’t solve the issue, uninstall and reinstall the Canon Pixma TS302 printer driver.

PIXMA TS302 Not Printing Black or Color Ink

  • If the Canon Pixma TS 302 printer is not printing black or color ink, it is possible that the printhead nozzle has been clogged by dried-up ink. You can follow the detailed guidelines mentioned below to clean the printhead on your Canon TS 302 printer.
  • Ensure that the TS 302 printer is powered on.
  • Touch the Resume button on the Pixma device and continue holding it until the alarm LED flashes twice.
  • Now, the Pixma TS302 printer cleans the printhead automatically.
  • The printhead cleaning of the Pixma device takes about 30 seconds to complete, and the ON LED glows steadily after it is completed.
  • Now, run a test print on the Pixma TS 302 printer and check whether the issue has been resolved.

Why PIXMA TS302 Not Working

You can follow these guidelines if your Pixma TS 302 printer stops working.

  • Check whether the Pixma TS 302 printer is turned on. If not, touch the Pixma device’s ON button to switch it on.
  • Check whether the Pixma TS 302 printer is connected correctly to the computer. Disconnect the USB cable from the USB hub if it is being used. Connect the Pixma device’s USB cable directly to the computer’s USB port.
  • Go to the Pixma device’s control panel and check if the paper settings correspond to the paper which has been loaded into the Pixma printer’s rear tray.
  • When you print a document, make sure the document isn’t too large. Also, check whether the correct Pixma device is chosen from the Print menu on your print application when printing a document.
  • Restart the computer to which the Pixma device has been connected. This solves most of the ‘Pixma device not working’ issues.
why-pixma-ts302-not-working

Canon Pixma Ts302 Error Code

If the Pixma TS 302 printer displays an error code, you can refer to this guide to resolve the issues.

  • When the alarm LED on your Pixma 302 device flashes twice, it means that the printer is out of paper. The error code that corresponds to this issue is 1000. You need to load compatible paper sheets into the Pixma device’s paper tray and select a paper size by touching the printer’s Paper Select button on the control panel. Press Resume.
  • If the Pixma device’s alarm LED flashes three times, and the Paper LED also blinks, it means that there could be a mismatch between the paper settings of the Pixma device and that of its rear tray. This problem corresponds to the error code 2114. To resolve this, press the ON/Stop button. Check whether the paper which has been loaded into the printer’s rear tray matches the paper size which is given as input by using the Paper Select button.
  • When the Pixma device’s alarm LED blinks three times, it could mean that the cover is open, or there is a paper jam at the paper input tray/rear tray. These issues correspond to error codes 1203 and 1300, respectively. To fix the first issue (error code 1200), carefully remove the paper with both hands and close the lid. You can touch the Resume button on the control panel to resume printing.
  • To fix the paper jam issue (error code 1300), follow these steps. You can remove the jammed paper from either the paper output area or the rear tray. Try removing the paper by holding it with both hands and pulling it out slowly. If it can’t be removed easily, try powering the Pixma device on again. The Pixma device will automatically eject the jammed paper. Then, reload the paper and try printing.
  • If the alarm LED flashes eight times, it means that the ink absorber is nearly full. You will have to press the Resume button to resume printing on the Pixma device. This applies for the error codes 1701, 1712, and 174.
canon-pixma-ts302-error-code