IJ Start Canon TS8220 Setup

Installing the Canon TS8220 Setup is an easy task. The setup procedure should be carried out carefully. It is advised to place the printer on a dust-free surface. Proper, regular maintenance of the printer is essential to avoid issues. Proceed with the guidelines provided below to set up the printer.

IJ Start Canon TS8220 Unboxing Setup

  • The Canon TS8220 printer comes well packed in the carton.
  • Cut the tape on top of the carton using scissors.
  • Take the printer and all the resource materials out of the box.
  • Discard all the packing materials inside and outside the box.
  • The power cable is supplied along with the printer.
  • It is recommended to use only this cable to connect the printer to a wall socket for establishing the power connection.
  • Pull the input tray from the printer and place enough paper on it.
  • Set the paper width guides at the edges of the paper.
  • The printer has holders for six ink cartridges. Put the ink cartridges into their appropriate holders.
  • The color on the label of the cartridge should match with that on the cartridge slot.
  • After aligning the cartridges, the printer prints an alignment page.
  • Now, proceed to install the Canon Pixma TS8220 driver using the installation CD or by downloading it.
Unbox Canon TS8220 Setup

IJ Start Canon TS8220 Driver & Manual Download

A driver is used as an interface between the printer and the system. The Canon TS8220 printer supports two types of driver-MP and XPS. Download the driver from our website or use the Setup CD to begin the process. Click the driver link to initiate the download process. Give a double-click on the downloaded driver to begin the installation process. If you cannot get the link or download the driver, use the manual to get the instructions for the process. The manual is also available on our website. Click it to begin the download process. Get the PDF format of the driver if required.

Driver Download
Manual Download

IJ Start Canon TS8220 Printhead

When you print an image or document from the Canon TS8220 Setup, you may get horizontal white streaks in the print-outs. To fix this type of problem, it is recommended to clean the printhead. However, clean the printhead only when it is necessary as you may lose ink during the process.

IJ Start Canon TS8220 Printhead Cleaning

  • Be sure that the printer is powered on.
  • Load A4 sheets into the paper cassette.
  • On the Canon TS8220 printer’s control panel, select the gear-shaped icon to open the Settings menu.
  • Tap Maintenance on the Setup menu screen.
  • Select the Cleaning option and a confirmation screen will appear.
  • Touch Yes and the Canon TS8220 printer starts to clean the printhead.
  • This process may take about one minute.
  • Do not do any other operation until the printer finishes the cleaning process.
  • Select Yes on the Pattern Print Confirmation screen that appears on the printer’s operation panel.
  • Tap Yes, and the paper output tray will be pulled out automatically.
  • Now the Nozzle Check Pattern will be printed. Examine the pattern and clean the printhead again if the error prevails.

IJ Start Canon TS8220 Print

You can print images, documents, and envelopes from the Canon TS8220 printer. To get high-quality prints, use the ink cartridges that are compatible with your printer.

How To Print On IJ Start Canon TS8220?

  • Turn on the Canon TS8220 printer if it is powered off.
  • Open the input tray, load paper into the tray, and close it.
  • Open the printer driver’s setup page by clicking the Printer icon on your desktop, and select Printing Preferences.
  • Tap the Quick Setup tab. Select the predefined print settings in the Commonly Used Settings.
  • Click Apply after making the required changes. Tap the OK button.
  • Select the print quality from the drop-down menu.
  • Choose Paper Sources. Click the OK button.
  • Now the printer starts the printing operation.
  • The settings in the Quick Setup, Main, and Page Setup are saved automatically if you select the Always Print with Current Settings option.

IJ Start Canon TS8220 Copy Function

Copying helps to create a duplicate file of the original one. In Canon TS8220 printer you can perform the copy operation easily. Canon TS8220 Setup supports two-sided copying operation, copying from smartphones or tablet, and it also has the Special Copy menu. Perform the copy operation as per the user guide.

How To Copy On IJ Start Canon TS8220?

  • After finishing the connection setup, turn on your printer by pressing the Power button.
  • The next step is to do the initial setup process.
  • Press the Copy icon at the home screen of the printer.
  • Choose the Standard Copy option from the list of options.
  • Now you have to place the document to be copied on the scanner glass.
  • To do so, lift the scanner lid, place the document on the glass, and close it.
  • Do the necessary settings such as copy layout, the number of copies, print setting item, page size, and the media types in the Specify Setting page.
  • If you need a color copy, tap Color. Similarly, if you need a copy in black & white, select the Black & White option.
  • Take the original copy from the scanner glass once the process is done. Check the copy quality.

Ij Start Canon TS8220 Scan

The Scan operation delivers one or more item by accessing the original document. Using Canon TS8220 printer, you can scan any kind of document including the photos. You can use Canon PRINT Inkjet/SELPHY to perform the Scan operation from your printer & smartphone or tablet. The Canon PRINT Inkjet/SELPHY app is available for download in App Store & Google Play.

How To Scan On IJ Start Canon TS8220?

  • First of all, switch on your Canon TS8220 printer.
  • Make sure that the printer connection set up is done correctly and working properly.
  • Raise the scanner lid. Mount the document you want to scan on the scanner glass.
  • Make sure to place the document correctly in the printer glass.
  • Now, on your computer, start the IJ Scan Utility.
  • Click Start. Navigate to Control Panel All Programs Canon Utilities IJ Scan Utility IJ Scan Utility.
  • Click the Auto option in the Canon IJ Scan Utility page.
  • Click Settings and make the changes as required.
  • Now the printer starts the Scan operation.

Scan From Computer On IJ Start Canon TS8220

Let’s see how to perform Scan operation in Mac system.

  • Start the Scan operation by turning your printer ON.
  • Place the document/photo that you want to scan on the scanner glass.
  • Now, start the IJ Scan Utility Lite application on Mac system.
  • Tap the Finder menu. Select Applications from the Go option.
  • Now, double-click the Canon Utilities option and select IJ Scan Utility.
  • Tap the Canon IJ Scan Utility Lite icon.
  • Click the Settings option.
  • Set your preferred paper size, resolution, and PDF settings in the Settings menu.
  • Tap Document or Photo. Now the Scan operation will begin.

IJ Start Canon TS8220 Setup USB Port

  • The initial step of the procedure is to navigate to the manufacturer’s site.
  • Specify the OS version and the printer model number.
  • Download the MP driver package. Go to the Downloads folder and begin the installation process.
  • Run the setup file and tap Open in the succeeding window that appears.
  • Select Next in the Initial screen and then enter the username & password of the system carefully.
  • Choose Start Setup, click Next.
  • The next step is to select your region of residence. Comply with the User Agreement in the next window.
  • Once the status check is over, you have to choose a connection method.
  • Click the USB Connection(USB Cable) option in the following window.
  • Next, connect your Canon TS8220 printer and computer with the help of a USB cable.
  • Tap Execute on the Test Print window and choose Next option on the Setup Complete screen.
  • In the succeeding screen, you can select any additional software required and install it on your system.
  • Complete the printer registration process and complete the setup process.

IJ Start Canon TS8220 Wireless Setup

  • Follow the steps given here to connect your printer to the computer through a wireless connection.
  • Tap the Wireless icon and select Yes in the next screen.
  • Turn on your computer and double-click the downloaded file.
  • Tap Start Setup option in the Start Setup screen.
  • Select Next and choose your region/country in the succeeding screen.
  • Agree to the Agreement of License and choose Yes in the Check the Connection Method window.
  • Select a wireless network of your choice and specify the network key on the next window that opens.
  • Wait patiently till the network connection is set up.
  • Choose the list of optional software to be installed and tap Next.
  • Once the installation is over, click the Exit button in the Installation Completed Successfully screen.

IJ Start Canon TS8220 Wireless Direct

  • Firstly, ensure that your Canon TS8220 Setup is turned on.
  • Tap the Setup icon available on the home screen.
  • Choose Settings and then press the Device Settings option.
  • Select the LAN Settings option. Tap Wireless Direct.
  • Press the Wireless Direct Active/Inactive option and choose ON.
  • You should choose Yes or No from the If you Want to Display the password Information screen.
  • Go to your device and turn on the Wi-Fi feature by navigating to Settings.
  • Select the printer with the word DIRECT in it from the list displayed.
  • Specify the password in the next screen. Take a test print to check if they have been connected properly.

IJ Start Canon TS8220 IJNetwork Device Utility

  • The Canon TS8220 printer can be used to perform the initial network setup, modify printer network settings, and to check the status of the printer.
  • It is a part of the MP driver package. So when you download the driver, it will be installed on your computer.
  • To open it, go to the Start button, and choose the All Apps option.
  • Select Canon Utilities and then click on IJ Network Device Setup Utility.
  • If it is not available, then type IJ Network Device Setup Utility in the search bar and open it.
Canon Pixma TS8220 Setup Network Device Utility

IJ Start Canon TS8220 Troubleshooting

Troubleshooting an IJ Start Canon TS8220 printer depends upon the intensity of the issue occurred. Some common troubleshooting steps that you can follow to resolve most of the problems are, checking the network connection, confirming whether IJ Start Canon TS8220 is selected as the default printer, examining the power connections, looking for updates, verifying the ink levels of the cartridges, and more.

Solve IJ Start Canon TS8220 Printer Not Working Issue

  • Try the following solutions one after another and check if your IJ Start Canon TS8220 Setup printer works.
  • Initially, check if you have turned on your printer and examine if the power connection cables are properly secured.
  • When you perform a print job, make sure you fix the printer settings as per the material loaded in the rear tray or Cassette.
  • If you have set the paper in the rear tray and the print settings prefer to print from the cassette, then the printer will not perform the print job. So choose the correct tray.
  • Try deleting the print jobs that aren’t required anymore.

Fix IJ Start Canon TS8220 USB Connection Error

  • The printing speed of the IJ Start Canon TS8220 printer may decrease if there is any USB connection problem.
  • The functions of the printer get completed but at a slower rate. So rectifying the issue and diagnosing it will help.
  • The USB connection problem can be rectified when the message. This device can perform faster appears on the screen.
  • This issue can be diagnosed by checking the following requirements.
  • Check if the USB cable, port, and USB hub support the Hi-Speed USB connection.
  • A long cable will minimize the efficiency, hence make sure the USB cable you use is not longer than 3m.
  • Check if the Hi-Speed USB driver is of the latest version. If not, update to the latest version.

Clear IJ Start Canon TS8220 Scanning Issue

  • Check if the Canon PIXMA TS8220 printer is linked with the Mac or Windows computer using a wireless or wired connection.
  • Make sure that all the required drivers and software are installed on your personal computer.
  • Before you start the scan function, confirm that the Canon PIXMA TS8220 printer is in the Ready or Active state.
  • Ascertain to set the correct scan settings on the Mac or Windows system.
  • Issues in the scan job can also occur if the platen glass is not clean.
  • Try cleaning the flatbed scanner glass using a chemical agent.
  • Check if the Canon TS8220 Setup driver is damaged.
  • If yes, reinstall the newest version of the software from this site and then carry out a scan function.

Fix IJ Start Canon TS8220 Network Connection Problem

  • Make sure that your Canon PIXMA TS8220 printer is powered On.
  • Ensure that the device using which you are performing the print function is linked to the same network as your Canon PIXMA TS8220 printer.
  • The router or access point might have lost communication with the Canon PIXMA TS8220 printer.
  • In such cases, it is recommended to restart the Canon device, personal computer, and the wireless access point.
  • Confirm whether the driver of your Canon PIXMA TS8220 printer is configured to the correct port. Check the SSID of your printer.
  • Load a sheet of A4 paper into the cassette and then tap the Menu button on your Canon printer’s touch display.
  • Choose Setup, then press OK, and then tap on the Device Settings option.
  • Touch OK and scroll to the LAN settings option. Tap OK Confirm LAN Settings > OK.
  • Navigate to the Print LAN Details section and select OK, and then touch Yes.
  • Press OK to begin printing and then look for the details about your SSID on the printed Configuration sheet.

Solve IJ Start Canon TS8220 Error Code 1401

  • The error code 1401 on the Canon PIXMA TS8220 printer indicates that there is an issue with the printhead.
  • Power Off and then switch On the Canon PIXMA TS8220 printer. Replace the printhead for rectifying the problem.
  • Turn the Canon printer On and then raise the paper output tray.
  • Raise the document cover without touching the buttons on the control panel.
  • Open the ink holder and do not proceed until the printhead holder slides to the access area.
  • Make sure not to touch the printhead holder until it stops moving.
  • Push the tab located on the ink tank and then remove it from the Canon PIXMA TS8220 printer.
  • Take all the ink tanks out of the holder. Hold the Stop button and release it only after the carriage stops at the replacement position.
  • Raise the inner cover and pull the tray towards the Canon PIXMA TS8220 printer.
  • Use your finger for removing the printhead. Reinstall a new compatible printhead. If the error persists, service your Canon TS8220 Setup printer.